B02R-FT1 - 2 Point Rear Stabilizing System

B02R-FT1 - 2 Point Rear Stabilizing System


Order Shipment Notice: 

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.

Additional Costs Notice


Please be aware that installing a leveling jack system is a custom installation and may require additional labor and/or parts. These kits require mounts to be attached to the frame rails. In some cases additional labor is necessary to move objects that are in the way or pose a danger for installation or use of the system. 

Motorhomes are not all the same, even if you have the "same" model as your friend. Body builders generally do not not always assemble them with the brackets and other objects in exactly the same place. Locations may vary just enough to require relocation on one and not on the other.

Listed here are some examples where additional costs would be incurred.

  • Example 1- Safety Hazard: If the fuel tank is too close to a location that a jack mount must be welded, the fuel tank would have to be removed before welding on the jack mount to the frame, then reinstalled.
  • Example 2 - Obstruction: If a body mount is in the way of mounting a leveling jack, the body mount would have to be modified or moved to allow for installation of the jack and mount.
  • Example 3 - Additional Parts: If the space available to mount the pump assembly does not allow for mounting it directly on the jack or close to the jack, the hoses that were provided in the kit may not be long enough to reach. In this case new longer hoses will have to be purchased to complete the installation. (This also may require more time)

For situations like these, additional labor and/or parts will be required to complete the installation of the leveling system that is not shown in price listed.

Part# B02R-FT1

  • This vehicle specific system requires no welding or drilling to install - 100% BOLT ON!
  • This system features  a single pump and two powder coated cylinders made at our facility rated to lift 8,000 pounds per cylinder.
  • ​Rocker switch control allows simple press & hold operation to extend or retract jacks.
  • All necessary components and hardware for a complete installation!

*This system does not have an inclinometer and does not read a level plane like the Bigfoot Automatic Leveling System.

Write a review

Please login or register to review

 The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

Notice: There is a $250.00 shipping fee in addition to the total on this product.


  • Views: 1862
  • Product Code: B02R-FT1
  • Availability: In Stock
  • Installed Price: $2,411.00

Installed Price is before taxes and any other charges that may apply

Add and Keep Shopping Schedule Appointment