Engine Coolant Flush Service

Engine Coolant Flush Service


Order Shipment Notice: 

Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.


Price does not include parts, such as fluids or filters, unless specific parts with prices are listed on page.

A properly functioning cooling system circulates antifreeze/coolant through the engine and radiator, reducing heat levels produced by your RV’s engine. When your RV’s cooling system isn’t functioning properly, the temperature of your engine can get hot enough to damage itself. Heads can warp. Gaskets can blow. Your engine can fail. And all of those can be costly repairs.  Having your radiator inspected and keeping antifreeze/coolant fluids in good condition can save you a lot of money and time spent on the side of the road.  We will flush the cooling system with a cooling system cleaning additive and water to remove stubborn rust and corrosive deposits.  Just draining the radiator will only remove 40-45% of coolant, so the process of filling, running and draining the cooling system with cleaning additives is done at least 3 times to ensure a complete flush. The radiator cap and thermostat will also be replaced at this time.  All hoses will be inspected and you will be advised if they should be replaced. This preventative maintenance should be performed every two to three years.

This service includes the following:  (Parts are not included in price)

  •     Bring engine up to operating temperature
  •     Remove lower hose to drain coolant and reinstall hose
  •     Refill with water and additive
  •     Bring engine up to operating temperature
  •     Remove lower hose to drain water and remaining coolant and debris then reinstall hose
  •     Refill with water only
  •     Bring engine up to operating temperature
  •     Remove lower hose to drain water and remaining deposits then reinstall hose
  •     Install new thermostat and gasket ( Also install any other recommended and approved items, such as hoses )
  •     Refill with required coolant
  •     Bring engine up to operating temperature and check level
  •     Verify no leaks after service is complete

Write a review

Please login or register to review

 The state of California requires that this warning be posted for people purchasing products that reside in California.

WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov

  • Views: 1754
  • Product Code: CoolantFlushService
  • Availability: In Stock
  • Service Cost: $536.00

Service Cost is before taxes and any other charges that may apply

Add and Keep Shopping Schedule Appointment