Koni 8805-1002 - Workhorse W-Series Series/Kodiak/UFO Rear (04.5-Current)
Most orders are shipped within 24 hours from the order date. Orders placed on the weekend or after cutoff on Friday, and orders placed on select holidays are processed on the next business day. Please see our shipping terms for more information.
Please Note: If you have a 2004 please verify the top mount of the rear shock, if it is a eyelet then you need part # 8805-1003 for the rear. If it has a vertical stud top mount then this is the proper rear Koni for your coach. If your build date of your chassis was 3/30/2004 or later (VIN -43392081 or higher) this would be the correct shock.
Koni Frequency Selective Damping (FSD) shock absorbers provide superior handling characteristics without compromising ride comfort. The FSD is firm where you need it, such as through corners, but rides soft over expansion joints and rough roads. A special valve filters out annoying vibrations before they enter the vehicle, resulting in a smooth ride over a variety of road surfaces.
Please Note: If you have a 2004 please verify the top mount of the rear shock, if it is a horizontal bolt then you need the 8805-1003 Koni for the rear. If it is a vertical stud then this is the proper rear Koni for your coach. If your build date of your chassis was 3/30/2004 or later (VIN -43392081 or higher) this would be the correct shock.
- Workhorse W20 - W22 & W24 (04.5-Current) Rear
- Kodiak C4500/C5500 Rear (Pin/Pin)
- Workhorse UFO Rear
|Collapsed Length||Extended Length||Upper Mount||Lower Mount|
The state of California requires that this warning be posted for people purchasing products that reside in California.
WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov