11000 - AG Diesel RV Power Module CAT 3126 / C7 / C9
The 11000 Performance Module fits CAT 3126, C7 and C9 engines from 1998-2005 model years. This diesel performance module is designed for fuel economy with up to 30% increase in hp and fuel savings up to 10%-20%. Adjustable with a four position switch, Stock, +10%, +20%, & +30% hp. The module doesn't flash the ECM, instead it receives the data from the ECM, optimizes the signal to the engine improving the fuel efficiency and power. Best of all, this module comes with a Lifetime Warranty.
The RV Edition module will increase your power up to 30% over stock and is self-adjusting based on load and will deliver more power when needed.
And before you ask…no this does not flash your ECM! Instead we receive the data from the ECM and optimize the signal to the engine to improve both power and fuel efficiency. True Plug-and-Play connectivity means we aren’t going to ask you to cut and splice any wires. Just connect the module into your existing factory connectors.
AT4040XL Aero turbine 4" Resonated Muffler
Part # AT4040XL
For those unfamiliar with the Aero line of mufflers, they are a compact stainless steel muffler designed to be added to nearly any exhaust system that offers unrestricted airflow, while having unremarkable sound characteristics. The XL line of the AeroTurbines is considered their resonated version designed specifically to cancel out any in-cab drone that is typical of many aftermarket mufflers.
4" ID Inlet
4" ID Outlet
6" Body Diameter
16" Body Length
26" Overall Length
Built from T304 stainless steel inside and out, this muffler does not have any of the traditional packing found in many other mufflers that is known to breakdown over time, but rather uses a series of louvered baffles that are also designed to literally "suck" the exhaust away from the engine, even faster than a straight pipe, which results in lower exhaust gas temperatures.
Aero Turbine Install Kit - Made to Order Kit
THIS IS A KIT OF PARTS FOR INSTALLING AN AERO TURBINE MUFFLER FROM THE EXIT OF THE DOWN PIPE BACK TO THE EXHAUST TIP (NOT INCLUDING THE MUFFLER).
· HANGERS NEEDED TO INSTALL MUFFLER
· CLAMPS NEEDED TO INSTALL MUFFLER
· TIP OF YOUR CHOICE FOR A TURNDOWN OR DUAL WALL
· PIPE NEEDED TO INSTALL MUFFLER
64009 - Exhaust Gas Temperature Gauge Kit
Exhaust Gas Temperature (EGT) is a very important gauge to have on any diesel engine, especially if modifications have been made to increase horsepower and torque. The Banks Power EGT Gauge Kit will accurately measure your exhaust gas temperatures up to 1500 Degrees Fahrenheit. This kit utilizes high quality components that are specific for use on motorhomes.
We recommend installing the Thermocouple Probe in the exhaust manifold pre-turbo. This location will provide the most accurate readings.
- Monitors exhaust gas temperature (EGT)
- Protects durability by eliminating safe-EGT-level guesswork
- Eliminates erroneous readings with ambient temperature compensation
- Accurate within 15 degree F at maximum operating temperatures
- 2000 degree F-rated, chromel-alumel thermocouple wire provides superior conductivity
- 1-Year Limited Warranty
- Illuminated 0-1500F full-sweep face
- Comes with probe & 55' lead wire
The state of California requires that this warning be posted for people purchasing products that reside in California.
WARNING: Products may contain one or more chemicals known in the State of California to cause cancer and/or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov